Maintenance of spring steel wire rope

Because the spring steel wire rope has strong functionality and high practicability, it is loved by everyone. However, when we use the steel wire rope every day, the steel wire rope not only bears load, fatigue and wear, but also has a bad working environment. Therefore, daily maintenance and inspection in use are very important. When we maintain the steel wire rope, we should pay attention to the following problems.
Coiled Cable Lanyards

1. The spring steel wire rope needs to be repainted with rust proof and lubricating grease regularly. To prevent the steel wire rope from rusting.

2. Regularly remove the dust and other oil dirt with impurities on the surface of the spring steel wire rope.

3. At ordinary times, pay more attention to and check and record the wear, wire breakage, rust, grease, deformation, diameter and other abnormalities of the steel wire rope.

4. Before using the spring steel wire rope, we should conduct a comprehensive inspection. If we find that the steel wire rope has abrasion, broken wire, broken strand, corrosion, stretching, bending, deformation, fatigue, diameter, exposed degree of rope core and so on, we must replace the new rope in time.
Wire Rope Lanyards

The second is the maintenance precautions of spring steel wire rope. When we find rust and dirt on the spring steel wire rope, we need to use a steel wire brush to remove it and apply oil;, Then apply oil to the steel wire rope every 4 months. When applying oil, you need to use hot oil, usually about 50 degrees Celsius, soak the rope core, and then wipe off the excess grease; After the steel wire rope is coiled, it should be placed in a clean and dry place, and it should not be overlapped and stacked to prevent accidents. At the same time, we need to tie the end of the steel wire rope with steel wire or weld it firmly with alloy with low melting point, or use iron hoop to tighten it, so as to avoid the loose end of the rope and the damage of the steel wire rope at that time.

In use, if there are oil droplets extruded on the surface of the steel wire rope, it means that the steel wire rope has borne considerable force. At this time, stop increasing the load, check it, and replace it with a new steel wire rope if necessary.


Post time: Aug-02-2022